Electronics | | |
Power | | 250 W RMS per channel into 8 ?? |
| | 30 W pure class A |
| | 1000 W RMS on lower impedance |
Sensitivity | | 1 V or 2 V RMS |
Bandwidth | | 0 Hz to 120 KHz, +0/-0.5 dB |
Crosstalk | | Not related for mono amplifiers |
Signal-to-noise ratio | | Typically 110 dB |
| | ASA“A” weighted |
THD+N | | < 0.03% |
Input type | | XLR balanced |
| | RCA unbalanced |
Input impedance | | 88 K?? on balanced input |
| | t44 k?? on unbalanced input |
DC filter | | Toggle switch allows to cut the DC of incoming signals |
Protection, | | Overheating> +70° C (158° F) |
Remote in and out | | 1/8″ jacks in and out can trigger the amplifier on or off from a Nagra MPS or a home automation system |
Power cord | | IEC C19 this is not the standard IEC but a larger 20A plug |
Monitoring | | |
| | Nagra modulometer, precision measurement tool |
| | Clipping LED |
| | Intensity can be adjusted, from off to full bright |
General | | |
Consumption | | 1200 W max |
| | less than 1 W in standby and Auto mode |
Weight | | 56 Kg (123.4 lb) each unit |
Size | | Width 23.8 x Height 64.4 x Deepness 54.2 cm (9.3 x 25.3 x 21.3″) |
Operating range | | 90– 110 V or 110 -132 V or 180– 264 V a.c. |
| | 50– 60 Hz |